Publications

Home

Members

Projects

Teaching

 

Publications

Vacancies

Links

Contact

Peer-reviewed Journal Articles: (reverse chronological order)

Aucott, L., Huang, D., Dong, H. B*., Wen, S. W., Marsden, J. A., Rack, A., & Cocks, A. C. F. (2017). Initiation and growth kinetics of solidification cracking during welding of steel. Scientific Reports (Nature), 7, Article number: 40255 (2017); doi:10.1038/srep40255

D'Souza, N., Feitosa, L. M., West, G. D., Jones, N. G., & Dong, H. B*. (2017). Effects of solute trapping on solidification path in Ta-rich Ta-Al-Fe ternary alloys under rapid freezing. Journal of Alloys and Compounds, 698, 433-441. doi:10.1016/j.jallcom.2016.12.149

Hu, X. G., Zhu, Q., Midson, S. P., Atkinson, H. V., Dong, H. B., Zhang, F., & Kang, Y. L. (2017). Blistering in semi-solid die casting of aluminium alloys and its avoidance. Acta Materialia, 124, 446-455. doi:10.1016/j.actamat.2016.11.032

Hu, X. G., Zhu, Q., Atkinson, H. V., Lu, H. X., Zhang, F., Dong, H. B., & Kang, Y. L. (2017). A time-dependent power law viscosity model and its application in modelling semi-solid die casting of 319s alloy. Acta Materialia, 124, 410-420. doi:10.1016/j.actamat.2016.11.031

Liang, X. Z., Dodge, M. F., Liang, W., & Dong, H. B*. (2017). Precipitation of chromium nitride nano-rods on lamellar carbides along austenite-ferrite boundaries in super duplex stainless steel. SCRIPTA MATERIALIA, 127, 45-48. doi:10.1016/j.scriptamat.2016.09.004

Yan, Y., Zhang, H., Fan, J., Wang, L., Zhang, Q., Hou, M.,Dong H. B., Xu, B. (2016). Improved mechanical properties of Mg matrix composites reinforced with Al and carbon nanotubes fabricated by spark plasma sintering followed by hot extrusion. Journal of Materials Research, 31(23), 3745-3756. doi:10.1557/jmr.2016.413

Pang, H. T., D'Souza, N., Dong, H., Stone, H. J., & Rae, C. M. F. (2016). Detailed Analysis of the Solution Heat Treatment of a Third-Generation Single-Crystal Nickel-Based Superalloy CMSX-10K((R)). METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A(2), 889-906. doi:10.1007/s11661-015-3252-2

Zhang, D., Dong, H., & Atkinson, H. (2016). What is the Process Window for Semi-solid Processing?. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A(1), 1-5. doi:10.1007/s11661-015-3185-9

Liu, X., Lv, X., Dong, H., Li, C., & Bai, C. (2015). Effect of Al on the Wetting Behavior Between TiC<inf> x</inf> and Molten Ti-Al Alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 46(10), 4783-4792. doi:10.1007/s11661-015-3058-2

Liang, D., Sun, J., Liu, T., Zhai, Q., Wang, G., StJohn, D. H., Dong H. B. Zhong, H. (2015). Enhanced Heterogeneous Nucleation by Pulsed Magneto-Oscillation Treatment of Liquid Aluminum Containing Al3Ti1B Additions. ADVANCED ENGINEERING MATERIALS, 17(10), 1465-1469. doi:10.1002/adem.201400488

Welton, D., D'Souza, N., Kelleher, J., Gardner, S., Dong, Z. H., West, G. D., & Dong, H.* (2015). Discontinuous Precipitation in Ni-Base Superalloys During Solution Heat Treatment. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A(9), 4298-4315. doi:10.1007/s11661-015-3046-6

Liu, X., Lv, X., Dong, H., Li, C., & Bai, C. (2015). Effect of Al on the Wetting Behavior Between TiC (x) and Molten Ti-Al Alloys. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A(10), 4783-4792. doi:10.1007/s11661-015-3058-2

Zhang, H., Cheng, W., Fan, J., Xu, B., & Dong, H. (2015). Improved mechanical properties of AZ31 magnesium alloy sheets by repeated cold rolling and annealing using a small pass reduction. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 637, 243-250. doi:10.1016/j.msea.2015.04.057

Jin, W., Fan, J., Zhang, H., Liu, Y., Dong, H., & Xu, B. (2015). Microstructure, mechanical properties and static recrystallization behavior of the rolled ZK60 magnesium alloy sheets processed by electropulsing treatment. JOURNAL OF ALLOYS AND COMPOUNDS, 646, 1-9. doi:10.1016/j.jallcom.2015.04.196

Dodge, M. F., Gittos, M. F., Dong, H*., Zhang, S. Y., Kabra, S., & Kelleher, J. F. (2015). In-situ neutron diffraction measurement of stress redistribution in a dissimilar joint during heat treatment. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 627, 161-170. doi:10.1016/j.msea.2014.12.095

Aucott, L., Wen, S. W., & Dong, H*. (2015). The role of Ti carbonitride precipitates on fusion zone strength-toughness in submerged arc welded linepipe joints. Materials Science and Engineering A, 622, 194-203. doi:10.1016/j.msea.2014.10.057

Wang, B., Yang, Z. G., Zhang, X. F., Wang, Y. T., Nie, C. P., Liu, Q., & Dong, H. B. (2015). Analysis of the effects of electromagnetic stirring on solidification structure of bearing steel. Metalurgija, 54(2), 327-330.

Dou, K., Qing, J., Wang, L., Zhang, X., Wang, B., Liu, Q., & Dong, H. (2014). RESEARCH ON INTERNAL CRACK SUSCEPTIBILITY OF CONTINUOUS-CASTING BLOOM BASED ON MICRO-SEGREGATION MODEL. ACTA METALLURGICA SINICA, 50(12), 1505-1512.

Zhang, H., Liu, Y., Fan, J., Roven, H. J., Cheng, W., Xu, B., & Dong, H. (2014). Microstructure evolution and mechanical properties of twinned AZ31 alloy plates at lower elevated temperature. Journal of Alloys and Compounds, 615, 687-692. doi:10.1016/j.jallcom.2014.07.045

Zhang, H., Huang, G., Fan, J., Roven, H. J., Xu, B., & Dong, H. (2014). Deep drawability and drawing behaviour of AZ31 alloy sheets with different initial texture. Journal of Alloys and Compounds, 615, 302-310. doi:10.1016/j.jallcom.2014.06.199

Yang, Z. -G., Wang, B., Zhang, X. -F., Wang, Y. -T., Dong, H. -B., & Liu, Q. (2014). Effect of Electromagnetic Stirring on Molten Steel Flow and Solidification in Bloom Mold. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 21(12), 1095-1103.

Zhang, H., Jin, W., Fan, J., Cheng, W., Jørgen Roven, H., Xu, B., & Dong, H. (2014). Grain refining and improving mechanical properties of a warm rolled AZ31 alloy plate. Materials Letters, 135, 31-34. doi:10.1016/j.matlet.2014.07.130

Zhang, J., Dou, Y., & Dong, H. (2014). Intrinsic ductility of Mg-based binary alloys: A first-principles study. Scripta Materialia, 89, 13-16. doi:10.1016/j.scriptamat.2014.06.035

Zhang, H., Yan, Y., Fan, J., Cheng, W., Roven, H. J., Xu, B., & Dong, H. (2014). Improved mechanical properties of AZ31 magnesium alloy plates by pre-rolling followed by warm compression. Materials Science and Engineering A, 618, 540-545. doi:10.1016/j.msea.2014.09.066

Li, K., Song, M., Du, Y., Tang, Y., Dong, H., & Ni, S. (2014). Investigation of the as-solidified microstructure of an Al-Mg-Si-Cu alloy. Journal of Alloys and Compounds, 602, 312-321. doi:10.1016/j.jallcom.2014.03.026

Dodge, M. F., Dong, H. B., & Gittos, M. F. (2014). Effect of post-weld heat treatment on microstructure evolution in dissimilar joints for subsea oil and gas systems. Materials Research Innovations, 18, S4907-S4913. doi:10.1179/1432891714Z.000000000807

Dong, H., & Dai, H. (2014). Single-Crystal Casting/Directional Solidification. Unknown Journal, 5, 89-108. doi:10.1016/B978-0-08-096532-1.00508-2

Chen, H. M., Yin, Y. F., Dong, H. B., Tong, Y., Luo, M., & Li, X. (2014). Porous alumina infiltrated with melt and its dynamic analysis during pressureless infiltration. Ceramics International, 40(4), 6293-6299. doi:10.1016/j.ceramint.2013.11.088

Xiong, J. T., Zhang, X. C., Li, P., Qian, J. W., Li, J. L., Zhang, F. S., & Dong, H. B. (2014). Characterisation of periodic variation in torque occurred in friction stir welding process. Science and Technology of Welding and Joining, 19(4), 350-354. doi:10.1179/1362171814Y.0000000195

Mirihanage, W. U., Di Michiel, M., Reiten, A., Arnberg, L., Dong, H. B., & Mathiesen, R. H. (2014). Time-resolved X-ray diffraction studies of solidification microstructure evolution in welding. Acta Materialia, 68, 159-168. doi:10.1016/j.actamat.2014.01.040

Brown, A. J., Dong, H. B., Howes, P. B., & Nicklin, C. L. (2014). In situ observation of the orientation relationship at the interface plane between substrate and nucleus using X-ray scattering techniques. Scripta Materialia, 77, 60-63. doi:10.1016/j.scriptamat.2014.01.023

Brown, A. J., Dong, H. B., Howes, P. B., & Nicklin, C. L. (2014). In situ observation of the orientation relationship at the interface plane between substrate and nucleus using X-ray scattering techniques. Scripta Materialia, 77, 60-63. doi:10.1016/j.scriptamat.2014.01.023

Liu, H., Li, Y., Zhang, C., Dong, N., Li, H., Dong, H., & Han, P. (2014). The tensile properties and fracture of the Ni/Cr2O3 interface: First principles simulation. COMPUTATIONAL MATERIALS SCIENCE, 82, 367-371. doi:10.1016/j.commatsci.2013.09.066

Aucott, L., Wen, S., & Dong, H. (2014). On the relationship of microstructure, toughness, and hardness properties in a submerged arc welded API-5L grade X65 pipeline steel section. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, 5. doi:10.1115/OMAE2014-23858

Zhang, J., Dou, Y., & Dong, H. (2014). Intrinsic ductility of Mg-based binary alloys: A first-principles study. Scripta Materialia. doi:10.1016/j.scriptamat.2014.06.035

Brown, A. J., Dong, H. B., Howes, P. B., & Nicklin, C. L. (2014). In situ observation of the orientation relationship at the interface plane between substrate and nucleus using X-ray scattering techniques. Scripta Materialia. doi:10.1016/j.scriptamat.2014.01.023

Xie, Y., Dong, H., & Dantzig, J. (2014). Growth of Secondary Dendrite Arms of Fe C Alloy during Transient Directional Solidification by Phase-field Method. ISIJ INTERNATIONAL, 54(2), 430-436. doi:10.2355/isijinternational.54.430

Dodge, M. F., Dong, H. B., Gittos, M. F., & Mobberley, T. (2014). Fusion zone microstructure associated with embrittlement of subsea dissimilar joints. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, 5. doi:10.1115/OMAE2014-23643

Xie, Y., Dong, H., Liu, J., Davidchack, R., Dantzig, J., Duggan, G., . . . Browne, D. (2013). A multi-scale approach to simulate solidification structure evolution and solute segregation in a weld pool. Journal of Algorithms and Computational Technology, 7(4), 489-507. doi:10.1260/1748-3018.7.4.489

D'Souza, N., Simmonds, S., West, G. D., & Dong, H. B. (2013). Role of elemental sublimation during solution heat treatment of Ni-based superalloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44(10), 4764-4773. doi:10.1007/s11661-013-1816-6

Liu, H., Li, Y., Zhang, C., Dong, N., Lan, A., Li, H., . . . Han, P. (2013). Effects of aluminum diffusion on the adhesive behavior of the Ni(111)/Cr2O3(0001) interface: First principle study. COMPUTATIONAL MATERIALS SCIENCE, 78, 116-122. doi:10.1016/j.commatsci.2013.05.037

Mirihanage, W. U., Dai, H., Dong, H., & Browne, D. J. (2013). Computational modeling of columnar to equiaxed transition in alloy solidification. Advanced Engineering Materials, 15(4), 216-229. doi:10.1002/adem.201200220

Jia, J., Fan, J., Xu, B., & Dong, H. (2013). Microstructure and properties of the super-hydrophobic films fabricated on magnesium alloys. Journal of Alloys and Compounds, 554, 142-146. doi:10.1016/j.jallcom.2012.11.117

Xie, Y., Dong, H. B., & Dantzig, J. A. (2013). Using the interface Peclet number to select the maximum simulation interface width in phase-field solidification modelling. Computational Materials Science, 70, 71-76. doi:10.1016/j.commatsci.2012.12.030

D'Souza, N., Simmonds, S., Dong, H. B., & West, G. D. (2013). Role of Elemental Sublimation during Solution Heat Treatment of Ni-Based Superalloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1-10. doi:10.1007/s11661-013-1816-6

Chen, H. M., Yin, Y. F., Tong, Y., Luo, M., Li, X., & Dong, H. B. (2013). Porous alumina infiltrated with melt and its dynamic analysis during pressureless infiltration. Ceramics International. doi:10.1016/j.ceramint.2013.11.088

Wen, S., Dong, H., Zhang, S. Y., Bannister, A., & Connelly, M. (2013). Neutron diffraction measurement of weld residual stresses in an UOE linepipe subjected to mechanical expansion. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, 3. doi:10.1115/OMAE2013-11257

Tong, M., Duggan, G., Liu, J., Xie, Y., Dodge, M., Aucott, L., . . . Browne, D. J. (2013). Multiscale, multiphysics numerical modeling of fusion welding with experimental characterization and validation. JOM, 65(1), 99-106. doi:10.1007/s11837-012-0499-6

Liu, J., Davidchack, R. L., & Dong, H. B. (2013). Molecular dynamics calculation of solid-liquid interfacial free energy and its anisotropy during iron solidification. Computational Materials Science, 74, 92-100. doi:10.1016/j.commatsci.2013.03.018

Brown, A., Dong, H., Howes, P., & Nicklin, C. (2013). Exploring the use of a synchrotron X-ray scattering method to investigate nucleation. Materials Science Forum, 765, 102-106. doi:10.4028/www.scientific.net/MSF.765.102

Dodge, M. F., Dong, H. B., Milititsky, M., Barnett, R. P., & Gittos, M. F. (2013). Environment-induced cracking in weld joints in subsea oil and gas systems - Part II. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, 3. doi:10.1115/OMAE2013-10339

Dong, H., & Liu, J. (2012). Molecular dynamics calculation of thermodynamic properties of iron solidification. IOP Conference Series: Materials Science and Engineering, 33(1), 012113. doi:10.1088/1757-899X/33/1/012113

Brewster, G., D'Souza, N., Ryder, K. S., Simmonds, S., & Dong, H. B. (2012). Mechanism for Formation of Surface Scale during Directional Solidification of Ni-Base Superalloys. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 43A(4), 1288-1302. doi:10.1007/s11661-011-1027-y

Goodyer, C. E., Jimack, P. K., Mullis, A. M., Dong, H., & Xie, Y. (2012). On the fully implicit solution of a phase-fieldmodel for binary alloy solidification in three dimensions. Advances in Applied Mathematics and Mechanics, 4(6), 665-684. doi:10.4208/aamm.12-12S07

Tong, M., Duggan, G., Browne, D. J., Liu, J., Xie, Y., Dodge, M., . . . Wen, S. (2012). Multiscale, Multiphysics Numerical Modeling of Fusion Welding with Experimental Characterization and Validation. JOM, 1-8. doi:10.1007/s11837-012-0499-6

Dodge, M. F., Dong, H. B., Milititsky, M., Barnett, R. P., Marques, V. F., & Gittos, M. F. (2012). Environment-induced cracking in weld joints in subsea oil and gas systems - Part I. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, 3, 305-312. doi:10.1115/OMAE2012-83402

Tong, M., Liu, J., Xie, Y., Dong, H. B., Davidchack, R. L., Dantzig, J., . . . Browne, D. J. (2012). An integrated framework for multi-scale multi-physics numerical modelling of interface evolution in welding. IOP Conference Series: Materials Science and Engineering, 33(1). doi:10.1088/1757-899X/33/1/012029

Dong, H., & Kumar, R. V. (2011). UK: China steel. Ironmaking and Steelmaking, 38(7), 518. doi:10.1179/030192311X13135947814059

Brewster, G., D'Souza, N., Ryder, K. S., Simmonds, S., & Dong, H. B. (2011). Mechanism for Formation of Surface Scale during Directional Solidification of Ni-Base Superalloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1-15.

Dai, H. J., D'Souza, N., & Dong, H. B. (2011). Grain Selection in Spiral Selectors During Investment Casting of Single-Crystal Turbine Blades: Part I. Experimental Investigation. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1-9.

Dai, H. J., D'Souza, N., & Dong, H. B. (2011). Grain selection in spiral selectors during investment casting of single-crystal turbine blades: Part I. Experimental investigation. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 42(11), 3430-3438. doi:10.1007/s11661-011-0760-6

Dai, H. J., Dong, H. B., D'Souza, N., Gebelin, J. -C., & Reed, R. C. (2011). Grain Selection in Spiral Selectors During Investment Casting of Single-Crystal Components: Part II. Numerical Modeling. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1-8.

Dai, H. J., Dong, H. B., D'Souza, N., Gebelin, J. C., & Reed, R. C. (2011). Grain selection in spiral selectors during investment casting of single-crystal components: Part II. Numerical modeling. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 42(11), 3439-3446. doi:10.1007/s11661-011-0757-1

D'Souza, N., & Dong, H. B. (2011). Determination of transition temperatures during freezing and melting of interdendritic phases in Ni based superalloys. Materials Science and Technology, 27(1), 325-331. doi:10.1179/026708309X12506933873189

Han, P. D., Li, H. F., Sun, X. L., Liang, W., Dong, H. B., & Xu, B. S. (2011). Combined first principle and experimental study of oxide/alloy interface evolution during hot rolling 430 stainless steels. Ironmaking and Steelmaking, 38(7), 530-533. doi:10.1179/1743281211Y.0000000032

Simmonds, S., D'Souza, N., Ryder, K. S., & Dong, H. (2011). Analysis of surface scale on the Ni-based superalloy CMSX-10N and proposed mechanism of formation. IOP Conference Series: Materials Science and Engineering, 27(1). doi:10.1088/1757-899X/27/1/012038

D'Souza, N., Beanland, R., Hayward, C., & Dong, H. B. (2011). Accuracy of composition measurement using X-ray spectroscopy in precipitate-strengthened alloys: Application to Ni-base superalloys. Acta Materialia, 59(3), 1003-1013. doi:10.1016/j.actamat.2010.10.031

Niu, W., Gill, S., Dong, H., & Bai, C. (2010). A two-scale model for predicting elastic properties of porous titanium formed with space-holders. Computational Materials Science, 50(1), 172-178. doi:10.1016/j.commatsci.2010.07.022

Kantor, B., Mason, C., D’Souza, N., Dong, H. B., & Green, N. R. (2009). Influence of Al and Nb on the Castability of a Ni-Base Superalloy, IN713LC. International Journal of Cast Metals Research, 22(01-Apr), 62-65. doi:10.1179/136404609X367344

Pang, H. T., Dong, H. B., Beanland, R., Stone, H. J., Rae, C. M. F., Midgley, P. A., . . . D’Souza, N. (2009). Microstructure and Solidification Sequence of the Inter-Dendritic Region in a 3rd Generation Single Crystal Nickel-Base Superalloy. Metallurgical and Materials Transactions, 40(7), 1660-1669. Retrieved from http://www.springerlink.com/content/l476370126u26395/

D’Souza, N., & Dong, H. B. (2009). Measurement of Solute Segregation in as-cast Single Crystal Ni-Base Superalloys. International Journal of Cast Metals Research, 22(1), 58-61. doi:10.1179/136404609X367335

D'Souza, N., & Dong, H. B. (2009). Measurement of solute segregation in as-cast single crystal Ni-based superalloys. International Journal of Cast Metals Research, 22(1-4), 58-61. doi:10.1179/136404609X367335

Kantor, B., Mason, C., D'Souza, N., Dong, H. B., & Green, N. R. (2009). Influence of Al and Nb on castability of a Ni-base superalloy, IN713LC. International Journal of Cast Metals Research, 22(1-4), 62-65. doi:10.1179/136404609X367344

Dai, H. J., Gebelin, J. C., D’Souza, N., Brown, P. D., & Dong, H. B. (2009). The Effect of Spiral Shape on the Grain Selection during Casting of Single Crystal Blades. International Journal of Cast Metals Research, 22, 54-57.

Brewster, G., Dong, H. B., Green, N. R., & D'Souza, N. (2008). Surface segregation during directional solidification of Ni-base superalloys. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 39(1), 87-93. doi:10.1007/s11663-007-9118-2

Brewster, G., Dong, H. B., Green, N. R., & D'Souza, N. (2008). Solidification of Ni - Base Superalloys. Metallurgical and Materials Transactions, 39, 87-93.

Dong, H. (2008). Grain selection during directional solidification of aero-engine turbine blades. AIP Conference Proceedings, 1045, 51-60. doi:10.1063/1.2991350

Chi, M., Zhang, Z., Han, P., Fang, X., Jia, W., Dong, H., & Xu, B. (2008). Geometric and electronic structures of new endohedral fullerenes: Eu@C72. Journal of Molecular Modeling, 14(6), 465-470.

D'Souza, N., & Dong, H. B. (2008). An analysis of solidification path in the Ni-base superalloy, CMSX10K. Proceedings of the International Symposium on Superalloys, 261-269.

D'Souza, N., Lekstrom, M., & Dong, H. B. (2008). An analysis of measurement of solute segregation in Ni-base superalloys using X-ray spectroscopy. Materials Science and Engineering A, 490(1-2), 258-265. doi:10.1016/j.msea.2008.01.025

D'Souza, N., & Dong, H. B. (2007). Solidification path in third-generation Ni-based superalloys, with an emphasis on last stage solidification. Scripta Materialia, 56(1), 41-44. doi:10.1016/j.scriptamat.2006.08.060

Lekstrom, M., D'Souza, N., Dong, H. B., Ardakani, M. G., & Shollock, B. A. (2007). Solidification kinetics in the Ni-base superalloy, IN713LC. TMS Annual Meeting, 29-33.

D'Souza, N., Lekstrom, M., Dai, H. J., Shollock, B. A., & Dong, H. B. (2007). Quantitative characterisation of last stage solidification in nickel base superalloy using enthalpy based method. Materials Science and Technology, 23(9), 1085-1092. doi:10.1179/174328407X213224

Zhang, Z., Wang, Z., Liang, B., Dong, H. B., & Hainsworth, S. V. (2007). Effect of CeO2 on the microstructure and wear behavior of thermal spray welded NiCrWRE coatings. Wear, 262, 562-567. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33846284100&partnerID=40

Dong, H., & D'Souza, N. (2006). Quantification of liquid fraction evolution during casting of Ni-base superalloys with emphasis on last stage solidification. Modeling of Casting, Welding and Advanced Solidification Processes - XI, 1, 537-544.

Kurum, E. C., Dong, H. B., & Hunt, J. D. (2005). Microsegregation in Al-Cu Alloys. Metallurgical and Materials Transactions, 36A, 3103-3110.

D'Souza, N., Jennings, P. A., Yang, X. L., Dong, H. B., Lee, P. D., & McLean, M. (2005). Seeding of Single Crystal Superalloys - Role of Constitutional Undercooling and Primary Dendrite Orientation in Stray Grain Nucleation and Growth. Metallurgical and Materials Transactions, 36(5), 657-666.

D'Souza, N., Dong, H. B., Ardakani, M. G., & Shollock, B. A. (2005). Quantitive Correlation of Last Stage Solidification with Hot Tearing in the Ni-Base Superalloy IN713LC. Scripta Materialia, 53, 729-733.

Dong, H. B. (2005). Numerical Modelling and Experimental Investigation of Microsegregation in Al-4.45wt%Cu: Effect of Dendrite Joining. Journal of Materials Science, 21(5), 753-758.

Dong, H. B., & Brooks, R. (2005). Determination of Non-equibrilium Liquids and Solidus Temperatures in Al-Si and Al-Si-Mg Alloys. Materials Science and Engineering, 413-414, 470-473. doi:10.1016/j.msea.2005.09.023

Dong, H. B., & Hunt, J. D. (2005). A Numerical Model for Heat Flux DSCs: Determining Heat Transfer Coefficients within a DSC. Materials Science and Engineering, 413-414, 470-473.

Dong, H. B., & Lee, P. D. (2005). Simulation of Columnar-to-Equiaxed Transition in Directionally Solidified Al-Cu Alloys. Acta Materialia, 53, 659-668. doi:10.1016/j.actamat.2004.10.019

D'Souza, N., Dong, H. B., Ardakani, M. G., & Shollock, B. A. (2005). Solidification path in the Ni-base superalloy, IN713LC-quantitative correlation of last stage solidification. Scripta Materialia, 53(6), 729-733. doi:10.1016/j.scriptamat.2005.05.012

Dong, H., & D'Souza, N. (2005). Quantitative correlation of last stage solidification with hot tearing in IN713LC. Proceedings - European Metallurgical Conference, EMC 2005, 3, 1011-1019.

Dong, H. B., & Brooks, R. (2005). Determination of liquidus temperature in Al-Si and Al-Si-Mg alloys using a single-pan scanning calorimeter. Materials Science and Engineering A, 413-414, 480-484. doi:10.1016/j.msea.2005.09.016

Dong, H. B., Yang, X. L., Wang, W., & Lee, P. D. (2004). Simulation of Equiaxed Growth ahead of an Advancing Columnar Front in Directionally Solidified Ni-Based Superalloys. Journal of Materials Science, 39, 7207-7212.

Yang, X. L., Dong, H. B., Wang, W., & Lee, P. D. (2004). Microscale Simulation of Stray Grain Formation in Investment Cast Turbine Blades. Materials Science and Engineering, 386, 129-139.

Dong, H., Wang, W., & Lee, P. D. (2004). Simulation of the thermal history dependence of primary spacing during directional solidification. Proceedings of the International Symposium on Superalloys, 925-931.

Dong, H. B., Shin, M. R. M., Kurum, E. C., & Hunt, J. D. (2003). Determination of Liquid Fraction during Solidification of Aluminium Alloys using a Single-Pan Scanning Calorimeter. Fluid Phase Equilibria, 212, 199-208.

Dong, H. B., Shin, M. R. M., Kurum, E. C., Hunt, J. D., & Cama, H. (2003). A Study of Microsegregation in Al-Cu Using a Novel Single-Pan Scanning Calorimeter. Metallurgical and Materials Transactions, 34, 441-447. doi:10.1007/s11661-003-0080-6

Dong, H. B., & Hunt, J. D. (2001). A numerical model of a two-pan heat-flux DSC. Journal of Thermal Analysis and Calorimetry, 64, 167-176.

Dong, H. B., & Hunt, J. D. (2001). A novel single-pan scanning calorimeter. Measurement of thermophysical properties of metallic alloys. Journal of Thermal Analysis and Calorimetry, 64, 341-350.

Dong, H., & Hunt, J. D. (2000). A comparison of a novel single-pan calorimeter with a conventional heat-flux differential scanning calorimeter. High Temperatures - High Pressures, 32(3), 311-319.

Dong, H. B., & Hunt, J. D. (2000). A comparison of a novel scanning calorimeter with a conventional two pan scanning calorimeter. High Temperatures – High Pressures, 32, 311-319.

Dong, H. B., Zhu, J., & Zhong, X. Y. (1994). Effect of Si on the quantity of austentite dendrite in high ratio Si/C grey iron. Journal of University of Science and Technology Beijing, 16(3), 226-229.

Dong, H. B., Zhong, X. Y., & Lu, S. Z. (1994). Axial tensile strength and fracture mechanism of in-situ composites Al11La3/Al. Acta Materiae Compositae Sinica, 11(2), 15-21.

Dong, H. B., Zhong, X. Y., & Lu, S. Z. (1993). Preparation and solidification characteristic of in-situ directionally solidified eutectic Al11La3-Al composite. Acta Metallurgica Sinica, 6A, 102-106.

Guan, S. K., Dong, H. B., & Lu, S. Z. (1992). Effect of large undercooling on solidification structures of hypro-eutectic Fe-C-Si alloy. Materials Science and Technology, 11(3), 91-94.

 

Refereed Conference Proceedings (Reverse chronological order)

D'Souza, N., Welton, D., Kelleher, J., West, G. D., Dong, Z. H., Brewster, G., & Dong, H. B. (2016). Microstructure instability of ni-base single crystal superalloys during solution heat treatment. In Proceedings of the International Symposium on Superalloys Vol. 2016-January (pp. 267-277).

Zhang, D. Y., Atkinson, H. V., & Dong, H. B. (2016). The kinetics of melting: Liquid fraction versus time. In Solid State Phenomena Vol. 256 (pp. 94-99). doi:10.4028/www.scientific.net/SSP.256.94

Saleem, B., Dong, H., & Dodge, M. (2015). Phase Characterization of CRA Fastener INCONEL718 in Relation of Hydrogen Assisted Cracking. In MATERIALS TODAY-PROCEEDINGS Vol. 2 (pp. 383-392). Rutherford Appleton Lab, Harwell, ENGLAND: ELSEVIER SCIENCE BV. doi:10.1016/j.matpr.2015.05.053

Zheng, Q. -W., Jing, T., & Dong, H. -B. (2015). Modelling of Secondary Dendrite Arms Evolution during Solidification by a Phase-field Method. In MATERIALS TODAY-PROCEEDINGS Vol. 2 (pp. 466-473). Rutherford Appleton Lab, Harwell, ENGLAND: ELSEVIER SCIENCE BV. doi:10.1016/j.matpr.2015.05.063

Jin, Z., Li, K., Wu, X., & Dong, H. (2015). Modelling of microstructure evolution during thermoplastic deformation of Steel by a finite element method. In MATERIALS TODAY-PROCEEDINGS Vol. 2 (pp. 460-465). Rutherford Appleton Lab, Harwell, ENGLAND: ELSEVIER SCIENCE BV. doi:10.1016/j.matpr.2015.05.062

Son, S., & Dong, H. (2015). Measuring solid liquid interfacial energy by grain boundary groove profile method (GBG). In MATERIALS TODAY-PROCEEDINGS Vol. 2 (pp. 306-313). Rutherford Appleton Lab, Harwell, ENGLAND: ELSEVIER SCIENCE BV. doi:10.1016/j.matpr.2015.05.043

Zhang, D., Atkinson, H. V., Dong, H., & Zhu, Q. (2014). Comparison between prediction of liquid fraction versus temperature and experimental results from DSC and SPSC. In Solid State Phenomena Vol. 217-218 (pp. 442-449). doi:10.4028/www.scientific.net/SSP.217-218.442

Liu, J., & Dong, H. B. (2012). Molecular dynamics calculation of thermodynamic properties of iron solidification. In A. Ludwig (Ed.), MCWASP XIII: INTERNATIONAL CONFERENCE ON MODELING OF CASTING, WELDING AND ADVANCED SOLIDIFICATION PROCESSES Vol. 33 (pp. 10 pages). Schladming, AUSTRIA: IOP PUBLISHING LTD. doi:10.1088/1757-899X/33/1/012113

Dai, H. J., Dong, H. B., Atkinson, H. V., & Lee, P. D. (2008). Simulation of the columnar-to-equiaxed transition in alloy solidification -- the effect of nucleation undercooling, density of nuclei in bulk liquid and alloy solidification range on the transition. In Solid State Phenomena Vol. 139 (pp. 129-134). doi:10.4028/www.scientific.net/SSP.139.129

Dong, H., & Atkinson, H. V. (2006, March 12). Measurement of thermo-physical properties for solidification of aluminium alloys. In International Conference on "Simulation of Aluminium Shape Casting Processing: From Alloy Design to Mechanical Properties (pp. 23-29).

Smith, A. J., Atkinson, H. V., Hainsworth, S. V., Dong, H. B., & Haghayeghi, R. (2006, September 11). In situ Environmental Scanning Electron Microscope (ESEM) of semi-solid samples. In 9th International Conference on Semi-Solid Processing (pp. 700-703).

Dai, H. J., Gebelin, J. C., Newell, M., D’Souza, N., Brown, P. D., & Dong, H. B. (n.d.). Grain Selection during Solidification in Spiral Grain Selector,. In R. C. R. E. al (Ed.), In Proceedings of the International Symposium on Superalloys 2008 (pp. 367-374).

Dong, H. B., & D'Souza, N. (2006, September 18). A Phenomenalogical Analyses of Hot Tearing the Role of Alloy Chemistry. In 2nd European Metallurgical Conference (pp. 1011-1019).

Liu, J.; Dong, H. B. International Conference on Modeling of Casting, Welding and Advanced Solidification Processes (MCWASP) Location: Schladming, AUSTRIA Date: JUN 17-22, 2012. Book Series: IOP Conference Series-Materials Science and Engineering   Volume: 33     Article Number: 012113   DOI: 10.1088/1757-899X/33/1/012113

M Tong, J Liu, Yu Xie, H B Dong, R L Davidchack, J Dantzig, D Ceresoli,N Marzari, A Cocks, C Zhao, I Richardson, A Kidess, C Kleijn, L Hoglund, S W Wen, R Barnett and D J Browne, Book Series IOP Conf. Series: Materials Science and Engineering 33 (2012) 012029 doi:10.1088/1757-899X/33/1/012029

Hongbiao Dong, Single-pan Scanning Calorimetry, in proceedings of International Symposium of John Hunt 50 Year’s Research on Solidification, eds. Z. Fan, C. Stone, Brunel University Press, 12-14 December 2011, 381-393

Scott Simmonds, Hongbiao Dong*, Karl. Ryder, N. D’Souza, Analysis of Surface Scale on the Ni-base Superalloy CMSX10N Gas Turbine Blades, ICASP -3, the 3rd  International Conference on Advances in Solidification Processes, Aachen/Rolduc,  7th - 10th of June 2011,  2012 IOP Conf. Ser.: Mater. Sci. Eng. 27 012038, http://iopscience.iop.org/1757-899X/27/1/012038

Mingmei Zhu, Guanghua Wen, Ping Tang, Hongbiao Dong. Modelling of Fluid Flow and Heat Transfer in a Four-strand Tundish. The 4th International Conference on Modelling and Simulation of Metallurgical Processses in Steelmaking (METEC InSteelConR 2011). Dusseldorf, Germany. 27th June – 1st July 2011, STSI, Fluid Flow and Multi-Physics Modelling, paper no. 133.

N. D’Souza, H. B. Dong*, An Analysis of Solidification Path in the Ni-Base Superalloy, CMSX10K, in proceedings of Superalloys 2008, Editors R.C. Reed et al, 261-269

H. J. Dai, M. Sarwar, H. B. Dong*, H.V. Atkinson, N. D’Souza, P.D. Lee, Measurement of Nucleation Undercooling during Casting of Ni-Based Superalloy IN792, in proceedings of the 2007 International Symposium on Liquid Metal Processing and Casting, editors: P.D. Lee, A. Mitchell, J.P. Bellot, A. Jardy, 177-180

H.B. Dong*, Analysis of Grain Selection during Directional Solidification of Gas Turbine Blades, in proceedings of the 2007 International Conference of Mechanical Engineering (ICME 2007), editors: S.I. Ao, L. Gelman, D. W L. Hukins, A. Hunter, A.M. Korsunsky, pp: 1257-1261

H.J. Dai, H. B. Dong*, H.V. Atkinson, N. D’Souza, L. Thuinet, P.D. Lee, The Influence of Dendrite Packing Patterns on Primary Spacing Adjustment during Directional Solidification, in proceedings of the 5th Decennial International Conference on Solidification Processing 2007. 23-25th July 2007, University of Sheffield, UK, 1-5

N. D’Souza, M. Ganesan, H. B. Dong*, Implications of Micro-Segregation during Solidification of Ni-Base Superalloys – Evolution of Non-equilibrium Phases, in proceedings of the 5th Decennial International Conference on Solidification Processing 2007. 23-25th July 2007, University of Sheffield, UK, 85-88

H.B. Dong*, Analysis of Solidification Kinetics Using Single-pan Scanning Calorimetry, in proceedings of the 5th Decennial International Conference on Solidification Processing 2007. 23-25th July 2007, University of Sheffield, UK, 378-382

M. Lekstrom, N. D'Souza, H.B. Dong, M. Ardakani, B. Shollock, Determining the Freezing Rate during Final-Stage Solidification of the Ni-base Superalloy IN713LC, in proceedings of Frontiers in Solidification Science, editors: Jeffrey Hoyt, Mathis Plapp, Gabriel Faivre and Shan Liu, 29-33.

H.B. Dong*, H.V. Atkinson, Measurement of Thermo-Physical Properties for Solidification of Aluminium Alloys, in proceedings of Aluminum Shape Casting Processing - From Alloy Design to Mechanical Properties, editors Q. Wang, MJM, Krane, PD Lee, 23-29

H.B. Dong*, N. D’Souza, Quantification of Liquid Fraction Evolution during Casting of Ni-Base Superalloys with Emphasis on Last Stage Solidification, in proceedings of Modeling of Casting, Welding and Advanced Solidification Processes XI, Edited by Charles-Andre Gandin, Michel Bellet, John Allison, TMS (The Minerals, Metals & Materials Society), 537-544

H.B. Dong* and N. D’Souza, A Phenomenological Analyses of Hot Tearing – the Role of Alloy Chemistry, in proceedings of European Metallurgical Conference EMC2005, Vol 3, 2005. Editors: GDMB, Paul-Ernst-Strabe 10, D-38678 Clausthal-Zellerfeld. 1011-1019

H.B. Dong, W. Wang, P.D. Lee, Simulation of Thermal History Dependent Spacing in Directional Solidification of Nickel-Based Superalloys, in proceedings of Superalloys 2004, 925-931

H.B. Dong*, X.L. Yang, W. Wang, P.D. Lee, Simulation of Equiaxed Growth ahead of the Advancing Columnar Front in Directionally Solidified Ni-Base Superalloys, in proceedings of the 2003 International Symposium on Liquid Metal Processing and Casting. 281-286

X.L. Yang, H.B. Dong, W. Wang and P.D. Lee, Microscale Simulation of Stray Grain Formation in Investment Cast Turbine Blades, in proceedings of the 2003 Solidification and Crystallisation - European Congress on Advanced Materials and Processes, 855-860

H.B. Dong, M.R.M. Shin, E.C. Kurum, J.D. Hunt: Determination of Microsegregation and Liquid Fraction during Solidification of Aluminium Alloys using a Single-pan Scanning Calorimeter, in proceedings of the Sixteenth European Conference on Thermophysical Properties, 356-361

H.B. Dong, M.R.M. Shin, E.C. Kurum, J.D. Hunt and H. Cama, A Single Pan Scanning Calorimeter: Used to Investigate Reproducibility, Sensitivity and Microsegregation in Al-Cu Alloys, in proceedings of the 29th Annual Conference on Thermal Analysis and Applications,341-347
H.B. Dong and J.D. Hunt, A Computer Simulation Program for a Two-pan Heat Flux DSC, in proceedings of the 29th Annual Conference on Thermal Analysis and Applications, 571-589

H.B. Dong and J.D. Hunt, A numerical model of two-pan heat flux DSC which allows accurate results to be calculated from experiment, in proceedings of the 14th Symposium on Thermophysical Properties, 36-41

H.B. Dong and J.D. Hunt, The development of a novel single-pan scanning calorimeter and its use for the measurement of thermophysical properties, in proceedings of the 14th Symposium on Thermophysical Properties, 76-81

H.B. Dong and J.D. Hunt, A novel calorimeter and measurement of enthalpy change in pure metals and alloys. In proceedings of National measurement conference’1999, 286-290

J. Zhu, H.B. Dong, X.Y. Zhong, The study of rolling deformation technology of white cast iron, in proceedings of International GIFA Congress’94, 445-451.

 

Publication for research in teaching: (name with a * is the corresponding author)

H. B. Dong*, A. Norman, A. Wilby, A. Aroussi, J. C. Fothergill, An Integrated Approach to Design Teaching in a General Engineering Department, in proceedings of 5th International CDIO conference – Reframing Engineering Education: Impact and Future Direction, June 7-10, 2009, Singapore, paper number B6.3

 

Book chapters:

Book title: Solidification and Crystallization, Published by Wiley-VCH , editor: Dieter M. Herlach h, , 2006, ISBN 978-3-5276-04357, book chapter: 30 Simulation of Stray Grain Formation in Investment Cast Turbine Blades

Book Title: Current Themes in Engineering Science. AIP publications, Editor A.M. Korsunsky, 2008, ISBN: 978-0-7354-0573-8. Book Chapter: 6, Grain Selection during Directional Solidification of Aero-Engine Turbine Blades

Journal editorial

Hongbiao Dong, Vasant Kumar, UK: China Steel, Ironmaking and Steelmaking, Nov, 2011.

 

Conference and Research Seminar Presentations (name with** is invited talk)


H. B. Dong**, Molecular Dynamics Modelling of Solidification Interfaces, Research seminar at Institut fuer Materialphysik im Weltraum Deutsches Zentrum fuer Luft- und Raumfahrt Linder Hoehe, Koeln, Germany, 22 November, 2011 (expenses paid by the organiser)

Yu Xie, Hongbiao Dong, Jon Dantzig, Solute trapping in phase-field modelling of alloy solidification with asymmetric solute diffusivities, EUROMAT 2011, European Congress and Exhibition on Advanced Materials and Processes, Montpellier, France, 12– 15  September, 2011

H.B. Dong**, Invited lectures, Tsinghua Summer School on Solidification, Tsinghua University, China,16-23, August, 2011, (expenses paid by the organiser)

Scott Simmonds, Hongbiao Dong, Gyn Brewster, N. D’Souza, Formation of Surface Scale during Investment Cast Single-Crystal Gas Turbine Components,  8th International Charles Parsons Turbine Conference, 5 to 8 September 2011,  the University of Portsmouth, UK

Manish Javahar,  Huijuan Dai, Neil D’Souza, Hongbiao Dong, An Analysis of Competitive Growth in a 2-Dimensional Spiral Grain Selector, 8th International Charles Parsons Turbine Conference, 5 to 8 September 2011,  the University of Portsmouth, UK

Hongbiao Dong, David Browne, Alan Cocks, Ragnvald Mathiesen, Shuwen Wen, Lars Hoglund, Chris Kleijn, Lijuan Zhang, Tomasz Pfeifer, Aleksander Zak, Jon Dantzig,  Modelling of Interface Evolution in Advanced Welding (MintWeld): a project of the European Commission Seventh Framework Programme (FP7), ICASP -3, the 3rd  International Conference on Advances in Solidification Processes, Aachen/Rolduc,  7 – 10, June 2011

Manish Javahar,  Huijuan Dai, Neil D’Souza, Hongbiao Dong, Competitive Growth in Spiral Grain Selectors, ICASP -3, the 3rd  International Conference on Advances in Solidification Processes, Aachen/Rolduc,  7 - 10 of June 2011

H.B. Dong**, Phase Field Modelling of Solidification,  Faculty of Engineering, University of Leeds, UK, 26 January  2011

H.B. Dong**, Modelling of Solidification Interface Evolution,  Interdisciplinary Centre for Advanced Materials Simulation (ICAMS), Ruhr-University Bochum, Germany, 7 December 2010 ((expenses paid by the organiser)

H.B. Dong**, Multi-scale Modelling of Solidification, Computational Materials Laboratory, Institue for Materials, Ecole Polytechnique Federale de Lausanne (EPFL), 5 March 2010, (expenses paid by the organiser)

H.B. Dong** (Keynote speech), Pattern Selection in Alloy Solidification, the 2nd UK-China Particle Technology Forum, Guiyang, China, September 1-4, 2009 (registration fee paid by the organiser)

N. Dsouza, H. J. Dai, S. Lozano-Perez, H.B. Dong, Morphologies and Compositions of Inter-dendritic Phases in Investment Casting CMSX-10 Superalloys, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2009), 7-10 September 2009, Glasgow, UK.

H.J. Dai, Y.Z. Zhou, N.D’Souza, H.B. Dong, N. Green, An Analysis of Competitive Growth in a Spiral Grain Selector, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2009), 7-10 September 2009, Glasgow, UK.

W.J.Niu, C.G. Bai, G.B Qiu, H.B. Dong, S. P. Gill, Preparation and Mechanical Properties of Porous Ti and Ti Alloys, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2009), 7-10 September 2009, Glasgow, UK.

G. Y. Yi, H. B. Dong, H.A. Atkinson, N. Dsouza, A Front-Tracking Model for Modelling of Solidification Microstructures in Binary Alloys, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2009), 7-10 September 2009, Glasgow, UK.

H.B. Dong** (invited talk) TAC 2008, Thermal Analysis and Calorimetry 2008, NPL, Teddington, UK, April 1-2, 2008,

N. D’Souza and H. B. Dong, Measurement of Solute Segregation in as-cast Single Crystal Ni-Base Superalloys, ICASP-2. 2nd International Conference on Advances in Solidification Processes, University of Leoben, Austria, June 17-20, 2008

B. Kantor, C. Mason, N. D’Souza, H. B. Dong, N. R. Green, The Influence of Al and Nb on the Castability of a Ni-Base Superalloy, IN713LC, ICASP2 2nd International Conference on. Advances in Solidification Processes, University of Leoben, Austria, June 17-20, 2008

Dai, J-C. Gebelin, N.D’Souza, P.D. Brown and H.B. Dong, The Effect of Spiral Shape on the Grain Selection during Casting of Single Crystal Blades, ICASP2 2nd International Conference on. Advances in Solidification Processes, University of Leoben, Austria, June 17-20, 2008

G.Y. Yi, H.B. Dong, H.V. Atkinson and D’Souza, The Effect of Solute Concentration Approximation in the Growing Cell on Front-Tracking Modelling of Solidification, ICASP2 2nd International Conference on. Advances in Solidification Processes, University of Leoben, Austria, June 17-20, 2008

H.B. Dong**, Advanced Materials and Technologies for Aero-Engine Turbines, UK-Hong Kong Frontiers of Science Symposium, organised by the Royal Society with support of the Croucher Foundation and Hong Kong University of Science and Technology, Hong Kong, January15-18, 2008 (expenses paid by the organiser)

H.J. Dai, H. B. Dong, H.V. Atkinson, P.D. Lee, Simulation of the Columnar-to-Equiaxed Transition in Alloy Solidification - the Effect of Nucleation Undercooling, Density of Nuclei in Bulk Liquid and Alloy Solidification Range on the Transition, MRS 2007Fall meeting, Boston MA, USA, November 26-30,2007

H.B. Dong**, P.D. Lee, (Invited talk) A Comparison of Simulated Columnar-to-Equiaxed Transitions between a 2D and a 3D Cellular Automation Solidification Models, TMS Annual Meeting 2006, A Symposium in Honour of Prof. John Hunt, San Antonio, Texas, USA. March 12-16, 2006

Z.Y. Zhang, H.J. Dai, H.B. Dong, Application of Constant Heat Flux Mode in A Single-Pan Scanning Calorimeter, Sample Controlled Thermal Analysis - Techniques and Applications, University of Huddersfield, UK, November 23, 2005,

H.B. Dong**, Experimental Methods to Assess Local Solidification Kinetics related to Nucleation of Hot Tears, Solidification Community of Practice, PFB, Rolls-Royce plc, Bristol, UK, October 13, 2005,  (expenses paid by the organiser)

H.B. Dong, R. Brooks, Determination of Non-equilibrium Liquidus and Solidus Temperatures in Al-Si Alloys Using a Single-pan Scanning Calorimeter, presented at International Conference on Advances in Solidification Processes, Stockholm, Sweden, June 7-10, 2005

H.B. Dong and J.D. Hunt, A Numerical Model for Heat Flux DSCs: Determining Heat Transfer Coefficients within a DSC, presented at International Conference on Advances in Solidification Processes, Stockholm, Sweden, June 7-10, 2005,

H.B. Dong, M.R. M. Shin, E.C. Kurum, J.D. Hunt and H. Cama: A Study of Microsegregation using a Novel Single-Pan Scanning Calorimeter, presented at TMS Fall Meeting, Indianapolis, IN, USA, November 12-15, 2001

H.B. Dong and J.D. Hunt: A Computer Simulation Program for a Two-pan Heat Flux DSC, presented at TMS Fall Meeting, Indianapolis, IN, USA, November 12-15, 2001

H.B. Dong and J.D. Hunt: A novel single-pan scanning calorimeter and its measurement of thermophysical properties of metallic alloys, presented at 12th International Congress on Thermal Analysis and Calorimetry, Copenhagen, Denmark, August 14-18, 2000,

H.B. Dong and J.D. Hunt: A numerical model for two-pan heat flux DSCs, presented at 12th International Congress on Thermal Analysis and Calorimetry, Copenhagen, Denmark, August 14-18, 2000

Share this page:

Learning Resources

The Library is not just a collection of books - there are eBooks, help with study skills and careers, working areas (including computer rooms), meeting rooms, a cafe, a bookshop, and much more.

Go to the Library.

Blackboard is the university's Virtual Learning Environment, for staff and students.

Go to Blackboard.

Women in STEM

Athena SWAN

Want to return to your career in Science, Engineering or Technology after a career break? The Daphne Jackson Trust can help.